Receiving Card A8s
Specifications
3 Features
Features Description A8s can also work with the independent controller MCTRL4K featuring large loading capacity and support HDR10 compliant video input, realizing larger dynamic brightness range and larger color space, making the image smoother. A8s can reduce the frame latency (for the module that the RAM is built within the driver IC) of the video source on the receiving card end to one frame. Supporting HDR10 TECH Supporting low latency (Calibration not supported after rotation) www.novastar.tech
5
Receiving Card A8s
Specifications
Enabling of 18 bit mode could improve LED display grayscale by 4 times, and therefore avoid grayscale loss caused by brightness reduction and make images finer. 33 Features
Features
3.1 Improvement in Display Effect NOVASTAR Support 18Bit+
LTD.CO., XI'AN Support ClearView Support arbitrary-angle rotation for the screen Supporting pixel level brightness and chroma calibration Enable ClearView on NovaLCT to adjust the texture, size and contrast in different area based on human visual system to make image more realistic. Make A8s work together with MCTRL R5 and then set the screen on SmartLCT to make display rotate at any angel, show different shapes, and present changeable images. Working with NovaLCT and NovaCLB, A8s supports brightness and chroma calibration on each pixel. On NovaLCT, the image on the screen can be set to rotate in the multiples of 90° (90°, 180°, 270° and 360°). Working with NovaLCT, A8s supports quick adjustment of bright and dark lines, which can Supporting image rotation in 90° increments (Calibration not supported after rotation) Supporting quick seam correction www.novastar.tech
6
Features Receiving Card A8s Specifications Description remove the seams between modules and between cabinets. On NovaLCT or operation panel of controllers 3 Features which support 3D function, you can enable 3D function and set the 3D parameters to make the LED screen display 3D effects. Supporting 3D function Features Description The smart module is composed of Flash and MCU. Flash could store calibration coefficients and module information. MCU could communicate with the receiving card to realize monitoring over temperature, voltage and wiring communication status for the module. Working with the driver chip, A8s supports open circuit detection on LED. CO.,
Supporting the smart module (Supported by dedicated firmware program) TECH The smart module could make monitoring unit smaller, requiring no independent monitoring card and saving cabinet space. The transmission mode of low-voltage differential signaling (LVDS) is used, which reduces the number of data cables that connect the receiving card's HUB board to the module, increases the transmission distance, improves the signal transmission quality, and better stabilizes the image output. NOVASTAR Supporting LVDS transmission ( Supported by dedicated firmware program ) www.novastar.tech
7
Receiving Card A8s
Specifications
3 Features
After the module has been replaced, the receiving card can automatically read the new module ID and calibration coefficient which could be saved to calibration system files. Enable the Mapping function on NovaLCT, then the target cabinet will display the cabinet number and Ethernet port information, and the user could get the receiving card’s location and wiring route. On NovaLCT, the specified images could be set as the screen startup image and images used when the Ethernet cable is disconnected or no video source signal is available. On NovaLCT, lamp panel Flash could be managed. The voltage and temperature of the receiving card itself can be monitored without using other peripherals. The monitoring data can be checked 3.2 I
mSupporting module auto calibration provSupporting Mapping function emeSupporting setting of images pre-stored of the nreceiving card t iSupporting module Flash management nSupporting monitoring voltage and temperature of itself MXI'AN
LTD.
aintainability
www.novastar.tech
8
Features Receiving Card A8s Specifications Description on NovaLCT. Supports NovaStar's general 5-pin LCD module. 3 Features The LCD module is connected to the HUB board to display temperature, voltage, single operating time and total operating time of the receiving card. In the event of network outage, hold down the selftest button to read the calibration coefficient in module Flash back to the receiving card. Supporting LCD module 3.3 ISupport one-click application mof calibration coefficient in pmodule Flash rwww.novastar.tech
9
诺瓦科技LED全彩接收卡A8s参数设置说明书英文版 - 图文
