TLP3020, TLP3021, TLP3022, TLP3023
TOSHIBA PHOTOCOUPLER GaAs IRED & PHOTO-TRIAC
TLP3020,TLP3021,TLP3022,TLP3023
Unit: mm
OFFICE MACHINE
HOUSEHOLD USE EQUIPMENT TRIAC DRIVER
SOLID STATE RELAY
The TOSHIBA TLP3020, TLP3021, TLP3022 and TLP3023 consist of a photo-triac optically coupled to a gallium arsenide infrared emitting diode in a six lead plastic DIP package.
z Peak Off-State Voltage : 400 V (Min.) z Trigger LED Current
z On-State Current z UL Recognized z Isolation Voltage z Option (D4) Type z VDE Approved
: DIN EN 60747-5-2,
Certificate No. 40009302 : 30mA (Max.) (TLP3020) 15 mA (Max.) (TLP3021) 10 mA (Max.) (TLP3022) 5 mA (Max.) (TLP3023) : 100 mA (Max.)
: UL1577, File No. E67349 : 5000 Vrms (Min.)
JEDEC EIAJ Weight: 0.44g
― ―
TOSHIBA 11-9A2 PIN CONFIGURATION (TOP VIEW)
Maximum Operating Insulation Voltage: 630 VPK Highest Permissible Over Voltage: 6000 VPK
Note: When a EN 60747-5-2 approved type is needed, please designate
the “Option (D4) ”
z Creepage Distance : Clearance : Insulation Thickness :
7.62mm pich standard type 7.0 mm (Min.) 7.0 mm (Min.) 0.5 mm (Min.) 10.16 mm pich (LF2) type 8.0 mm (Min.) 8.0 mm (Min.) 0.5 mm (Min.)
1: ANODE 2: CATHODE 3: N.C.
4: TERMINAL 1 6: TERMINAL 2
12007-10-01
TLP3020, TLP3021, TLP3022, TLP3023 Absolute Maximum Ratings (Ta=25°C)
CHARACTERISTIC SYMBOL RATING UNIT Forward Current
Forward Current Derating (Ta ≥ 53°C)
Peak Forward Current (100μs pulse, 100pps) Power Dissipation
Power Dissipation Derating (Ta ≥ 25°C) Reverse Voltage Junction Temperature
Off-State Output Terminal Voltage On-Stage RMS
IF 50 mA ΔIF/°C
?0.7 mA/°C
LED IFP 1 A PD 100 mW ΔPD/°C
?1.0 mW/°C
VR 5 V Tj
125
°C
VDRM 400 V Ta=25°C 100 mA IT(RMS)
50 Current Ta=70°C On-State Current Derating
(Ta ≥ 25°C)
Peak On-Stage Current (100μs pulse, 120pps)
ΔIT/°C
?1.1 mA/°C
DETECTOR ITP 2 A ITSM 1.2 A PD 300 mW ΔPD/°C Tj Tstg Topr
?4.0 mW/°C 115 ?55 ～ 150 ?40 ～ 100
°C °C °C
Peak Nonrepetitive Surge
Current (PW=10ms, DC=10%) Power Dissipation
Power Dissipation Derating
(Ta ≥ 25°C)
Junction Temperature
Storage Temperature Range Operating Temperature Range Lead Soldering Temperature (10s) Total Package Power Dissipation Total Package Power Dissipation Derating (Ta ≥ 25°C)
Isolation Voltage
(AC, 1 min., R.H. ≤ 60%) (Note 1)
Tsol 260 °C
PT 330 mW ΔPT/°C
?4.4 mW/°C
Vrms BVS 5000 Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 1: Device considered a two terminal device: Pins 1, 2 and 3 shorted together and pins 4 and 6 shorted
together.
22007-10-01
TLP3020, TLP3021, TLP3022, TLP3023 Recommended Operating Conditions
CHARACTERISTICS SYMBOL MIN TYP. MAX UNIT Supply Voltage Forward Current Peak On-Stage Current Operating Temperature
VAC
?
? 120 Vac IF* 15 20 25 mA ITP Topr
? ?25
? 1 A ? 85 °C
Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the device. Additionally, each item is an independent guideline respectively. In developing designs using this product, please confirm specified characteristics shown in this document. *: In the case of TLP3022
Individual Electrical Characteristics (Ta=25°C)
CHARACTERISTIC SYMBOL TEST CONDITION MINForward Voltage LED Reverse Current
VF IR
=IF10mA VR=5V
TYP. MAX UNIT
1.0 1.15 1.3 V ?
? 10 μA
Capacitance CT V==0, f1MHz ? 10 ? pF Peak Off-State Current DETECTOR Peak On-Stage Voltage Holding Current
Critical Rate of Rise of Off- State Voltage Critical Rate of Rise of Commutating Voltage
IDRM VTM IH dv / dt dv / dt(c)
VDRM=400V ITM=100mA
?
Vin=120Vrms, Ta=85°C (Fig.1)Vin=30Vrms, IF=15mA (Fig.1)
? 10 100 nA ? 1.7 3.0 V ? 0.6 ? mA200
500
? V/μs
? 0.2 ? V/μs
Coupled Electrical Characteristics (Ta=25°C)
CHARACTERISTIC SYMBOL TEST CONDITION MIN
TLP3020
Trigger LED Current
TLP3021 TLP3022 TLP3023
Capacitance Input to Output Isolation Resistance
CS RS
VS=0, f=1MHz VS=500V (R.H. ≤ 60%) AC, 1 minute
Isolation Voltage
BVS
AC, 1 second (in oil) DC, 1 minute (in oil)
IFT
VT=3V
? ?
TYP. MAX UNIT? 30 ? 15 mA
? 5 10 ?
10? 5 14? 0.8 ? pF 5×10 10
?
? ?
Ω VrmsVdc
? 10000 ? ? 10000 ?
Fig. 1 dv/dt TEST CIRCUIT
32007-10-01
TLP3020, TLP3021, TLP3022, TLP3023 IF ? Ta
IT (RMS) ? Ta
IFP ?DR
IF ? VF
ΔVF/ΔTa ? IF IFP ? VFP
42007-10-01
TLP3020, TLP3021, TLP3022, TLP3023 NORMALIZED IFT ? Ta
NORMALIZED IH ? Ta
NORMALIZED IDRM ? Ta
NORMALIZED VDRM ? Ta
NORMALIZED LED CURRENT ? LED CURRENT PULSE WIDTH
52007-10-01
TLP3020
